Danby DMW1153BL Owners Manual - Page 10

POWER PAD Oven automatically cooks at high power. For a lower power level, set cook time, touch POWER and enter number (1-9) for lower power level. TIMER PAD Independent kitchen timer. Set any time even while oven is operating. Touch TIMER pad, set time then START. Touch RESET to cancel. COOK PAD Cook at one power level for a period of time, then automatically switch to another power level for the remaining cook time. COOK BY WEIGHT Touch COOK pad, enter weight of meat accurately, then START. After partial cooking, oven stops, leaving time on display. Turn over meat when oven stops after partial cooking. Retouch START to finish. DEFROST BY WEIGHT Automatic defrosting for large meats. Controls power level to thaw without excessive outside warming. SPEED DEFROST Automatically programs lower power levels for even defrosting. Touch SPEED DEFROST, set time and START. CLOCK Touch pad once, touch number pads and CLOCKto set clock. RESET Touch to clear display of unused time after cooking, also cancel timer. START/STOP PAD Touch as final step in setting oven. Touch to stop microwaving while oven is in operation (re-touch to continue timing shown on display). Will not stop timer. OPERATING INSTRUCTIONS 1.SETTING THE CLOCK A. Setting the clock when the oven is plugged in. • When the oven is first plugged into a wall outlet, touch the CLOCK pad once, the display will show "ENTER CLOCK TIME". • Enter the correct time of day by touching the correct number pads. You must set at least 3 digits (one for hour(s) and two for minutes). For minute less than 10, precede the "minutes" digit by a 0. Example: for 5 minutes past 2, set 2:05. The colon will flash between hour and minute digits. If you prefer not to have the clock displayed, set the clock for 00:00 and the display will only show a colon. • Touch CLOCK to lock in the time. Colon will stop flashing and clock will begin to keep current time. After clock has been set, the word prompt clock will always show on the display unless oven is in a cooking operation. B. Changing the clock time. • Touch the CLOCK pad once, the display will show" ENTER CLOCK TIME" • Enter the correct time of day by touching the correct number pads. You must set at least 3 digits (one for hour(s) and two for minutes). For minute less than 10, precede the "minutes" digit by a 0. Example: for 5 minutes past 2, set 2:05. The colon will flash between hour and minute digits. If you prefer to not have the clock displayed, set the clock for 00:00 and the display will only show a colon. • Touch CLOCK to lock in the time. Colon will stop flashing and clock will begin to keep current time. After clock has been set, the word prompt clock and time of day will always show on the display unless oven is in a cooking operation. 7