Danby DPAC10011 Product Manual - Page 5
exhaust/window
View all Danby DPAC10011 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
7 INSTALLATION I ELECTRIC SHOCK HAZARD: To avoid the possibility of personal injury, disconnect power to the unit before installing or servicing. Caution: To avoid installation/operation difficulties, read these instructions thoroughly. Flexible Exhaust Hose (13cm) & Exhaust nozzle connector (2 pcs)... from 17 14/ 0(45cm) to 53'/d' (135cm) Flexible Exhaust Hose (11cm) & Exhaust nozzle connector (2pcs)...from 15 14/ " (40cm) to 51 IA" (130cm) Adjustable sliding window/door Idt (3 pcs)... from 28 i/3"(72cm) to 80' (203cm) Fixture (2 pm) & Screws (8 pm) NOTE: The exhaust/window kit must be installed at all times when the unit is operating under AIR CONDITIONING mode. There should be at least 11.8" (30cm) clearance between the unit and any other objects or building structures, and should be installed on a level surface. Fig. 1 INSTALLATION ACCESSORIES Flexible Exhaust Hose Fixture Exhaust Nozzle Connector t v L 00 Screws 4444 4444 \ Sliding Window Kit: 28 1/3" (72cm)- 80" (203cm) Water hose (79"/ 200cm) Instructions for Assembling the Sliding Window Kit- Fig. 2 1) Insert tube adapters through the back of the window panel. 2) Secure each tube adapter with four screws through the front of the window panel. 3) Insert window panel extensions into window panel. Lightly tighten the screws in the window panel to hold the extensions in place. . 2 Back of window panel 4 4 Tube Adapters WINDOW KIT INSTALLATION Mr Conditioning Mode ONLY: Your window kit has been designed to fit most standard "vertical"/ 3) Install the adjustable Sliding Window Kit as required (see Fig. 4a & 4b). "horizontal" windows up to a maximum height of 80" (203cm). For vertical window applications, multi lock 4) Install the opposite end of the flexible exhaust positions are provided on the edge of each slider hose into the window exhaust adapter. section to secure each sliding section together. 1) Select a suitable location, making sure you have access to an electrical outlet. 5) Install the window exhaust adapter into the opening in the slider section, making sure the window slider sections are secure. 2) Install the flexible hose to the rear side of the unit. Insert the hose collar on top of the exhaust opening and twist to lock into position. 6) Plug the unit into a 115V/60Hz grounded electrical outlet. Fig 3a Horizontal Window 4 4 4+ 0. C) Sliding Window Kit Mix.: 28 'A" (72cm) Max.: 80" (203cm) Vertical Window Fig 3b A Sliding Window Kit: Min.: 28'/" (72cm) Max.: SO" (203cm)