Danby DPAC10011 Product Manual - Page 6

FEATURES OF THE CONTROL PANEL OPERATION LCD Display onT ± O El ©UOUa°r Cai Ls KEY PAD FUNCTIONS POWER SWITCH: 'Runs unit ON/OFF MODE: Allows you to scroll through and select desired operating mode. FAN: Select from three different fan settings; High, Medium, and Low. AUTO-TIMER AUTO-TIMER Adjust: AUTO TURN OFF- With machine in running mode, NOTE: By pressing both " " " - " buttons at the same time for more than 3 seconds, the display will toggle between Celsius and Fahrenheit. Warning Light Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning signal in the LCD Display will light up and the unit will not operate until it has been drained. LCD Display press timer button to set timer control. Press " + " or" - "buttons to select number of hours you would like the unit to run before it automatically shuts off. AUTO TURN ON- With machine in stand by mode, O O Cooling Mode di Dehumidify Mode Fan Only Mode a High Fan Speed press timer button to set timer control. Press " + " or" - "buttons to select number of hours before the unit automatically starts running under any one mode. Medium Fan Speed I Low Fan Speed 881Display Set Temperature NOTE: The time is adjustable between 1-24 hours. ea Display Timer Setting of Auto Switch ON / OFF TEMPERATURE Adjust: • Used for adjusting the thermostat. • The default display is room temperature. STOP Warning Light (the machine will stop running) • In cooling mode, when" + "or" - "button is pressed, the set temperature is displayed and may be adjusted. After 10 seconds the display will revert back to room temperature. Temperature is only adjustable in cool mode.