DeLonghi ESAM6600 Owner Manual - Page 11

Correct, Incorrect

Page 11 highlights

Infuser Push the PUSH symbol fully in until it clicks into place. After having heard the click, check that the red buttons have snapped out. Support Pin Bottom pipe on the infuser. The pin must be inserted into the bottom pipe on the infuser. Check that the two red buttons have snapped out, otherwise the door cannot be closed. The two red buttons have snapped out CORRECTLY The two red buttons have not snapped out CORRECT INCORRECT • Replace the drip tray, complete with the grounds container. • Close the service door. NOTE 1: If the infuser is not inserted correctly, until it clicks into place, and the two red buttons have not snapped out, the service door cannot be closed. NOTE 2: If it is hard to insert the infuser, before inserting it, squeeze it to the right size by pressing it forcefully from the top and bottom simultaneously, as shown in figure . NOTE 3: If it is still hard to insert the infuser, leave it out of the appliance, close the service door, unplug from the outlet then plug in again. Wait for all the lights to go off, after the diagnostics, then open the door and replace the infuser. 16 Collection

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

C
o
l
l
e
c
t
i
o
n
16
Check that the two red buttons have snapped out, otherwise the door cannot be closed.
Support
Pin
Infuser
Push the
PUSH
symbol fully in until
it clicks into place.
After having heard the click, check
that the red buttons have snapped
out.
Bottom pipe on the infuser. The pin must be inserted
into the bottom pipe on the infuser.
CORRECT
INCORRECT
The two red buttons have
snapped out
CORRECTLY
The two red buttons have not
snapped out
Replace the drip tray, complete with the grounds container.
Close the service door.
NOTE 1:
If the infuser is not inserted correctly, until it clicks into place, and the two red buttons have not
snapped out, the service door cannot be closed.
NOTE 2:
If it is hard to insert the infuser, before inserting it, squeeze it to the right
size by pressing it forcefully from the top and bottom simultaneously, as shown in
figure .
NOTE 3:
If it is still hard to insert the infuser, leave it out of the appliance, close the service door, unplug from
the outlet then plug in again. Wait for all the lights to go off, after the diagnostics, then open the door and
replace the infuser.