DeLonghi ESAM6600 Owner Manual - Page 16
Insert Water Spout - troubleshooting
View all DeLonghi ESAM6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
19 TROUBLESHOOTING MESSAGE MEANING WHAT TO DO FILL TANK • The water tank is empty or is positioned • Fill the water tank as described in sec- incorrectly. tion 4, and insert it fully. • The tank is dirty or encrusted with lime • Rinse or descale the tank. scale. GROUND TOO FINE ADJUST MILL • The coffee runs off too slowly. AND • Turn the grinding regulator (fig. 11) one click toward the number 7 (see section 8). INSERT WATER SPOUT AND • The appliance cannot make coffee. PRESS OK • Insert the hot water spout, press the button and run off water from the spout for a few seconds. • The grounds container is full or missing. • Empty the grounds container and clean EMPTY GROUNDS CONTAINER as described in section 6, note 7, then replace. • After cleaning, the grounds container • Open the service door and insert the INSERT GROUNDS CONTAINER has not been replaced. grounds container. ADD PRE-GROUND COFFEE FILL BEANS CONTAINER DESCALE • With the function selected, the pre- • Add the ground coffee as described in ground coffee has not been poured into section 9. the funnel. • The coffee beans have run out. • Fill bean container. • If the coffee grinder is very noisy, this • Contact an authorized De' Longhi serv- means a small stone in the coffee beans ice center. has blocked the mill. • This indicates the presence of lime scale • The descaling procedure, described in in the appliance. section 17.3, needs to be performed as soon as possible. PRESS • After cleaning, the infuser has probably • Leave the service door closed and the been left out of the coffee maker. infuser out of the appliance, press the pointed buttons, then follow the instructions displayed. CLOSE DOOR INSERT WATER SPOUT INSERT INFUSER ASSEMBLY • The service door is open • If the service door cannot be closed, check that the infuser is inserted correctly (section 16.2 - note 1). • The button has been pressed and • Insert the hot water spout (fig. 4). the hot water spout has not been insert- ed. • After cleaning, the infuser has probably • Insert the infuser, see section 16.2. been left out of the coffee maker. LESS COFFEE • The ground coffee funnel is clogged. • Empty the funnel with the help of a knife, • Too many coffee beans or too much as described in section 9, note 5 (fig. 16). ground coffee has been added. • Select a milder taste or reduce the quan- tity of ground coffee, then press or or or to deliver the coffee again. GENERIC ALARM • The inside of the appliance is very dirty. • Clean the inside of the appliance thoroughly, as described in section 16.2. If the message is still displayed after clean- ing, contact a service center. Collection 21