DeLonghi PAC C120E Owner Manual - Page 8
Operation - not cooling
View all DeLonghi PAC C120E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Operation TURNING THE APPLIANCE ON Plug into an outlet. Two lines appear on the display indicating that the appliance is in standby. Press the ON/STAND-BY button (A). When turned on, the air conditioner starts operating in the same mode as when it was turned off. Press the MODE button (B) until the light corresponding to the desired mode lights up: Light (Q) : AIR-CONDITIONING MODE Light (P) : DEHUMIDIFYING MODE Light (O) : FAN MODE AIR CONDITIONING MODE Ideal for hot muggy weather when you need to cool and dehumidify the room. To set this mode: press the + (E) or - (F) buttons until the desired temperature is displayed. Then select the fan speed by pressing the "FAN" button (C) until the light corresponding to the required fan speed lights up: HIGH: MAXIMUM SPEED the air conditioner operates at maximum to achieve the target temperature as rapidly as possible MED: MEDIUM SPEED reduces noise levels while maintaining a comfortable temperature LOW: LOW SPEED for silent operation and maximum energy efficiency AUTO: AUTO: the appliance automatically selects the most suitable fan speed in relation to the temperature set on the digital display and current room temperature. The most suitable temperature for the room during the summer varies from 75°F to 81°F (24 to 27°C). You are recommended, however, not to set a temperature much below the outdoor temperature DEHUMIDIFYING MODE Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc). In dehumidifying mode, the appliance MUST be set-up in the same way as for air conditioning, with the air exhaust hose attached to enable the moisture to be discharged outside. When the dehumidifying mode is selected, the light (P) comes on and " " appears on the display. At the same time, the AUTO fan light (N) comes on. In this mode, fan speed is selected automatically by the appliance and cannot be set manually. FAN MODE The unit operates without cooling or dehumidifying. This mode provides ventilation only. When using the appliance in this mode, the air exhaust hose does not need to be connected. Adjust fan speed by pressing the "FAN" button (C) as described for the air-conditioning mode. In this mode, AUTO speed cannot be selected. The fan speed selected will be displayed. 8