DeLonghi PAC T110P Owner Manual - Page 6
inches 106 mm - model
View all DeLonghi PAC T110P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4.17 inches (106 mm) Installing your portable air-conditioner Double window Open the double window slightly and position the window outlet (13) . Use the suction pads (14) or (22) (depending on model) to hold the two parts of the window together (fig. D and D1). 2 1 in the window pane F in the wooden kickboard of a French window in the wall: you are recommended to insulate the section of wall using suitable insulation. D Keep the air hoses as short and free of curves as possible to avoid constrictions. • Fit the flange accessory (11) provided in the hole. • Fit the hose (12/19) in the housing at the back of the appliance (fig. A / A1 page 5). • Fit the end of the hose (12/19) to the flange (11) as shown in fig. G. D1 SEMI-PERMANENT INSTALLATION If required, the Pinguino can also be installed semi-permanently (Fig. E and E1). G MAX 39.37 inches MAX100 cm MIN 13.77 inches MIN 35 cm 11,8 inches 30 cm 11.8 inches 30 cm E 11,8 inches 30 cm 11.8 inches 30 cm E1 Proceed as follows: • Drill a hole in an outside wall or through a window pane. Respect the height and dimensions of the hole (s) given in figures F and G. 6 When the hose (12/19) is not fitted, the drilled hole can be closed with the flange cap (11). NOTE. When installing the air conditioning unit semipermanently, you should leave a door slightly open as little as 1/2 inches (1 cm) to guarantee correct ventilation.