Dell 1710n Service Manual - Page 95

User attendance messages (continued) Message Explanation 58 Too Many Flash Options This error displays when too many flash options are installed in the printer. The following options may be taken: • Turn off the printer, and remove the extra flash options. • Press Go to clear the message. The extra flash options are ignored. 84 Photoconductor Life Warning This message displays when the photoconductor unit is near end of life. Press Go to clear the message. 84 Replace Photoconductor This message displays when the photoconductor is exhausted. The printer is disabled until the photoconductor is replaced. Replace the photoconductor: 1. Turn the printer off, and replace the photoconductor unit. 2. Reset the page count. • Press and hold Select and Return while turning the printer on. • Release the button when Performing Self Test displays. • Select Reset Maint Cnt, and press Select. The counter is reset to zero. 88 Toner Low This message displays when toner low occurs and the toner low alarm is activated. Press Go to clear this message. Diagnostics-E340 and E342n 2-63