Dell 8 Fabric OS Message Reference - Page 373

42 FW-1118 FW-1118 Message , [FW-1118], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric reconfigurations has fallen below the low boundary. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone offline. • A principal link has segmented from the fabric. A low number of fabric reconfigurations means that the fabric is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1119 Message , [FW-1119], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric reconfigurations has risen above the high boundary. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone offline. • A principal link has segmented from the fabric. Recommended Action Verify that all interswitch link (ISL) cables are properly connected at both ends. Verify that the small form-factor pluggable (SFP) has not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting. Severity INFO FW-1120 Message Probable Cause , [FW-1120], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Indicates that the number of fabric reconfigurations has changed from a value outside of the acceptable range to a value within the acceptable range. The following occurrences can cause a fabric reconfiguration: Fabric OS Message Reference 297 53-1001767-01