Dell 8 Fabric OS Message Reference - Page 670

95 SS-1003 SS-1003 Message , [SS-1003], ,, WARNING, , supportSave's operation to USB storage device aborted. Probable Cause Indicates a USB operation error has occurred during execution of the supportSave command. Complete error information cannot always be displayed in this message due to possible errors in subcommands being executed by the supportSave command. Recommended Run the usbstorage command to check the USB storage device settings. After the USB problem is Action corrected, rerun the supportSave command. Severity WARNING SS-1004 Message , [SS-1004], ,, WARNING, , One or more modules timed out during supportsave. Please retry supportsave with -t option to collect all logs. Probable Cause Indicates timeout in modules during supportsave. Recommended Run supportsave -t [2-5] to collect all logs. Action Severity WARNING SS-1005 Message , [SS-1005], ,, WARNING, , supportsave failed for the slot . Reason: No IP connection. Probable Cause Indicates the IP connection between Active CP and the blade in the corresponding slot does not exist. Recommended Check for the IP connection between Active CP and the corresponding slot. Once the IP connection Action gets established rerun the supportsave command. Severity WARNING SS-1006 Message , [SS-1006], ,, WARNING, , supportsave failed for the slot . Reason: supportsave request was not sent to the blade in the corresponding slot. Probable Cause Indicates the supportsave request was not sent to the blade in the corresponding slot. Recommended Reboot the switch and then run the supportsave command. Action 594 Fabric OS Message Reference 53-1001767-01