Dell 8 Fabric OS Message Reference - Page 591

90 SEC-1056 SEC-1056 Message , [SEC-1056], ,, ERROR, , Invalid position . Only members in list. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1057 Message , [SEC-1057], ,, ERROR, , No change. Both positions are the same. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1059 Message , [SEC-1059], ,, ERROR, , Fail to to flash. Probable Cause Indicates the operation failed when writing to flash. Recommended Run the supportFtp - e command to FTP files from the switch and remove them from the flash. Action Severity ERROR SEC-1062 Message , [SEC-1062], ,, ERROR, , Invalid number of Domains in Domain List. Fabric OS Message Reference 515 53-1001767-01