Dell 8 Fabric OS Message Reference - Page 683

Chapter SULB System Messages 97 SULB-1001 Message , [SULB-1001], , AUDIT, WARNING, , Firmwaredownload command has started. Probable Cause Indicates the firmwareDownload command has been started. This process should take approximately 17 minutes. The process is set to time out after 30 minutes. Recommended Action Do not fail over or power down the system during firmware upgrade. Allow the firmwareDownload command to continue without disruption. Run the firmwareDownloadStatus command for more information. Severity WARNING SULB-1002 Message , [SULB-1002],, AUDIT, INFO, , Firmwaredownload command has completed successfully. Probable Cause Indicates the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is required. The firmwareDownload command has completed as expected. Run the firmwareDownloadStatus command for more information. Run the firmwareShow command to verify the firmware versions. Severity INFO SULB-1003 Message , [SULB-1003], , AUDIT, INFO, , Firmwarecommit has started. Probable Cause Indicates that the firmwareCommit command has been started. Recommended No action is required. Run the firmwareDownloadStatus command for more information. Action Severity INFO Fabric OS Message Reference 607 53-1001767-01