Dell Alienware Area-51 ALX Service Manual - Page 40
Replacing the Media Card Reader
View all Dell Alienware Area-51 ALX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Replacing the Media Card Reader 1. Follow the instructions in "Before You Begin" on page 6. 2. Remove the new Media Card Reader from its packaging. Save the original packaging for storing or shipping the Media Card Reader. 3. Remove the FlexBay filler, if applicable: Pull the securing tab on the FlexBay bracket and slide the FlexBay filler out through the front of the computer. 4. Pull the securing tab on the FlexBay bracket and slide the Media Card Reader into the FlexBay, until the securing tab snaps into place. 5. Connect the FlexBay cable to the Media Card Reader. 6. Close the left side-panel. 7. Connect your computer and devices to electrical outlets, and then turn them on. CHAPTER 7: DRIVES 040 /040
040
040
/
CHAPTER 7: DRIVES
Replacing the Media Card Reader
Follow the instructions in “Before You Begin” on page
1.
6
.
Remove the new Media Card Reader from its packaging.
2.
Save the original packaging for storing or shipping the Media Card Reader.
Remove the FlexBay filler, if applicable:
3.
Pull the securing tab on the FlexBay bracket and slide the FlexBay filler out
through the front of the computer.
Pull the securing tab on the FlexBay bracket and slide the Media Card
4.
Reader into the FlexBay, until the securing tab snaps into place.
Connect the FlexBay cable to the Media Card Reader.
5.
Close the left side-panel.
6.
Connect your computer and devices to electrical outlets, and then turn
7.
them on.