Dell Alienware Aurora ALX Desktop Manual - Page 28
Configuring the BIOS, the BIOS
View all Dell Alienware Aurora ALX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Configuring the BIOS System Setup The System Setup options allow you to: • Change the system configuration information after you add, change, or remove any hardware in your desktop. • Set or change a user-selectable option. • View the amount of memory installed. • Set the type of hard drive installed. Before you use System Setup, it is recommended that you write down the current System Setup information for future reference. CAUTION: Do not change the settings in System Setup unless you are an expert computer user. Certain changes can cause your computer to work incorrectly. Entering System Setup 1. Turn on (or restart) your desktop. NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure, press and release in even intervals until the System Setup screen appears. 2. While the desktop is booting, press immediately before the operating system logo appears to access the BIOS Setup Utility. NOTE: If an error occurs during POST (Power On Self Test), press when the prompt appears to enter the BIOS Setup Utility. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, then shut down your desktop and try again. System Setup Screens The BIOS Setup Utility displays current or changeable configuration information for your desktop. Key functions appear at the bottom of the BIOS Setup Utility screen and lists keys and their functions within the active field. 28 CHAPTER 4: USING YOUR DESKTOP