Dell Alienware Aurora ALX Service Manual (English only) - Page 39
System and Security, Control Panel
View all Dell Alienware Aurora ALX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2. Align the notch on the bottom of the memory module with the tab on the memory-module connector. 1 1 cutouts 3 tab 5 securing clips (2) 6 5 4 3 2 2 memory-module connector 4 notch 6 memory module CHAPTER 7: MEMORY MODULE(S) 3. Insert the memory module into the memory-module connector until the memory module snaps into position. If you insert the memory module correctly, the securing clips snap into the cutouts at each end of the memory module. NOTE If the memory module is not installed properly, the computer may not boot. 4. To replace the graphics card, see "Replacing the PCI-Express Card(s)" on page 33. 5. Replace the left side-panel (see "Replacing the Left Side-Panel" on page 11). 6. Connect your computer and devices to electrical outlets and then turn them on. As the computer boots, it detects the additional memory and automatically updates the system configuration information. To confirm the amount of memory installed in the computer: Click Start → Control Panel→ System and Security→ System. CAUTION: To avoid damage to the memory module, press the memory module straight down into the memory-module connector while you apply equal force to each end of the memory module. 039 /039