Dell Alienware M16 R2 Owners Manual - Page 49
Rear I/O cover, Removing the rear I/O cover, Steps, Next steps
View all Dell Alienware M16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Steps 1. Adhere the battery cable to the battery. 2. Connect the battery cable to the battery. 3. Adhere the tape to secure the battery-cable connector. 4. Turn the battery over. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Rear I/O cover Removing the rear I/O cover CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the rear I/O cover and provides a visual representation of the removal procedure. 49
Steps
1.
Adhere the battery cable to the battery.
2.
Connect the battery cable to the battery.
3.
Adhere the tape to secure the battery-cable connector.
4.
Turn the battery over.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Rear I/O cover
Removing the rear I/O cover
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
About this task
The following image(s) indicate the location of the rear I/O cover and provides a visual representation of the removal procedure.
49