Dell B1260dn Laser Dell B1260dn Users Guide - Page 81
Installing driver over the network, Found New Hardware Wizard, Cancel
View all Dell B1260dn Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Installing driver over the network 5 Windows 1 Make sure that the machine is connected to the network and powered on. Also, your machine's IP address should have been set. 3 Select Next. If the "Found New Hardware Wizard" appears during the installation procedure, click Cancel to close the window. 2 Insert the supplied software CD into your CD-ROM drive. The software CD should automatically run and an installation window will appear. If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing "X" with the letter, which represents your CD ROM drive and click OK. 4 Select Connect a network printer to the computer. Click Next. 2. Using a network-connected machine 81
81±
2
Installing driver over the network±
5
Select
Next
.
Windows
3
Make sure that the machine is connected to the network and powered
1
on. Also, your machine’s IP address should have been set.
Select
Connect a network printer to the computer
. Click
Next
.
4
If the “
Found New Hardware Wizard
” appears during the installation
procedure, click
Cancel
to close the window.
Insert the supplied software CD into your CD-ROM drive.
The software CD should automatically run and an installation window
will appear.
If the installation window does not appear, click
Start
>
All programs
>
Accessories
>
Run
.
X:\
Setup.exe
replacing “X” with the letter, which represents your CD-
ROM drive and click
OK
.
2. Using a network-connected machine ±