Dell B1265dfw Dell Users Guide - Page 146

IPv6 configuration Setting IPv6 addresses The machine supports the following IPv6 addresses for network printing and managements. • Link-local Address: Self-configured local IPv6 address (Address starts with FE80). • Stateless Address: Automatically configured IPv6 address by a network router. • Stateful Address: IPv6 address configured by a DHCPv6 server. • Manual Address: Manually configured IPv6 address by a user. DHCPv6 address configuration (Stateful) If you have a DHCPv6 server on your network, you can set one of the following options for default dynamic host configuration. 1 Press the (Menu) button on the control panel. 2 Press Network > TCP/IP (IPv6) > DHCPv6 Config. 3 Press OK to select the required value you want. • DHCPv6 Addr.: Always use DHCPv6 regardless of router request. • DHCPv6 Off: Never use DHCPv6 regardless of router request. • Router: Use DHCPv6 only when requested by a router. 10 From the Embedded Web Service For models that do not have the display screen on the control panel, you need to access Embedded Web Service first using the IPv4 address and follow the below procedure to use IPv6. 1 Access a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go. 2 If it's your first time logging into Embedded Web Service you need to log-in as an administrator. Type in the below default ID and password. • ID: admin • Password: dell00000 3 When the Embedded Web Service window opens, move the mouse cursor over the Settings of the top menu bar and then click Network Settings. 4 Click TCP/IPv6 on the left pane of the website. 5 Check the IPv6 Protocol check box to activate IPv6. 6 Check the Manual Address check box. Then, the Address/Prefix text box is activated. 2. Using a Network-Connected Machine 146