Dell B5460dn Dell Laser Printer Users Guide - Page 30
Installing hardware options, Order of installation
View all Dell B5460dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Additional printer setup 30 3 Remove the screws holding the printer hard disk in place. 4 Remove the printer hard disk. 5 Set aside the printer hard disk. Installing hardware options Order of installation CAUTION-POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. CAUTION-SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. CAUTION-TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity tray or more than one option. If you purchased a printer with a similar configuration, you may need additional furniture. For more information, contact the place where you purchased the printer.