Dell Brocade 300 QuickStart Guide - Page 5

• Ground all equipment in the cabinet through a reliable branch circuit connection and maintain ground at all times. Do not rely on a secondary connection to a branch circuit, such as a power strip. • Ensure that airflow and temperature requirements are met on an ongoing basis, particularly if the switch is installed in a closed or multi-rack assembly. • Verify that the additional weight of the switch does not exceed the cabinet's weight limits or unbalance the cabinet in any way. • Secure the cabinet to ensure stability in case of unexpected movement. For additional installation, electrical, environmental, and other considerations, refer to the SilkWorm Switch Safety Guide. Items Included with the Brocade 5000 The following items are included with the standard shipment of the Brocade 5000: • The Brocade 5000 switch, containing two power supply/fan assembly units • One accessory kit, containing the following items: - The Brocade Documentation CD-ROM - 32 SFP (small-form-factor pluggable) transceivers (optional) - Mounting ears and screws - Rubber mounting feet (to be used when setting up the Brocade 5000 as a standalone unit) - Two grounded 6-ft. (approximately 1.83 meters) power cords • The power plug type is NEMA5-15 • Power plug current/voltage rating: 15A/125V • Cordage type: SVT • Current rating/wire gauge: 10A/ 18AWG • Connector at system end of cordset: IEC 60320/ C13 - One serial cable, 10-ft. (approximately 3 meters) long - EZSwitch Setup CD - EZSwitch Setup ReadMe First document - Fabric Manager Evaluation CD Brocade 5000 QuickStart Guide Publication Number: 53-1000425-01 7 of 12