Dell Brocade 5100 Brocade Fabric OS v7.3.0a Release Notes v2.0 - Page 50
Defects
View all Dell Brocade 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Closed with Code Change Defects in Fabric OS v7.3.0a Defects Closed with Code Change in Fabric OS v7.3.0a This section lists the defects with Critical, High and Medium Technical Severity closed with a code change as of August 8, 2014 in Fabric OS v7.3.0a Defect ID: DEFECT000333728 Technical Severity: Medium Probability: Low Product: FOS Technology: Monitoring/RAS Reported In Release: FOS6.4.0 Technology Area: Fabric Watch Symptom: Packet loss and Utilization is only applicable to VE_ports. Condition: Admin Guide has been updated to indicates that these two areas are only applicable to VE_ports. Defect ID: DEFECT000483437 Technical Severity: High Probability: High Product: FOS Technology: Management Reported In Release: FOS7.2.0 Technology Area: Web Tools Symptom: On Web Tools, the cascaded switch Icon in Fabric Tree gets greyed out and the pop up shows the status as "Unmonitored". Condition: This issue occurs when a switch is running FOS version v7.2.0 or higher while the remote switch is running FOS version v7.1.x or lower, and one of switches has VF enabled while the other switch has VF disabled. This issue will not occur if all switches are running FOS version v7.2.0 or higher, regardless of whether VF is enabled or disabled. Workaround: Run same FOS version on all switches in the fabric. Defect ID: DEFECT000496874 Technical Severity: High Probability: High Product: FOS Technology: Distance Reported In Release: FOS7.1.1 Technology Area: Extended Fabrics Symptom: During DWDM failover test, Link Reset from Buffer to Buffer (BB) credit recovery timed out resulting in link reinitialization. Condition: Can occur when two consecutive BB credit recovery interrupts occur due to invalid characters in link and while traffic is passing. Recovery: Port disable and enable the affected port to recover. Defect ID: DEFECT000500085 Technical Severity: Medium Probability: Medium Product: FOS Technology: Management Reported In Release: FOS7.2.0 Technology Area: NTP - Network Time Protocol Symptom: Switches in the fabric are unable to communicate with the NTP server. Condition: When the BR5647 is insert into the embedded chassis or when the chassis CMM is rebooted, the CMM will push the NTP network configuration for internal communication to external fabric wide. Recovery: Reconfigure NTP address in any other non-embedded switch in the fabric. Fabric OS v7.3.0a Release Notes v2.0 Page 50 of 55