Dell Brocade 6520 Fabric Watch Administrator's Guide Supporting Fabric OS v7.1 - Page 101
Recommended environment and resource monitoring settings, Switch monitoring
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Recommended environment and resource monitoring settings 8 Configuring the system memory usage monitoring threshold Enter the sysMonitor command using the following parameters: switch:admin> sysmonitor --config mem -poll 10 -retry 1 -limit 20 -action snmp, raslog -high_limit 80 Recommended environment and resource monitoring settings Table 27 lists the recommended settings for Environment and Resource classes. TABLE 27 Recommended Environment and Resource class settings Trait Configuration E=Error_Log, S=SNMP_Trap, P=Port_LOG_LOCK, M=EMAIL_ALERT, PF=Port Fence Class Area Default Custom Unit Time Base Low Thresh High Thresh Buffer Default Custom Below Above Notes Environment Temperature X C None 0 Resource Flash X Percentage None 0 Depends 10 X on switch type 90 0X E,S E,S E,S E,S Switch monitoring Before entering the switchStatusPolicySet command, plan your switch status policy. Determine your system requirements and the factors that affect its monitors. NOTE Based on the configuration of the core blade component of the switch status policy, Fabric Watch generates two RASlogs when a core blade is removed either on the Brocade DCX or the Brocade DCX-4S. For example, if the Down and Marginal configuration is 0 and 1 on the DCX, upon removal of the first core blade, Fabric Watch generates one RASlog for the switch status policy and the other RASlog for the error itself. Fabric Watch Administrator's Guide 81 53-1002752-01