Dell Brocade 6520 Fabric Watch Administrator's Guide Supporting Fabric OS v7.1 - Page 97
Resource class settings, Resource class area, Resource class setting guidelines
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Resource class settings 8 TABLE 24 Area Environment class default settings (Continued) Description Default threshold settings Brocade 8000 Low: 0 High: 73 Buffer: 10 Brocade DCX Low: 0 High: 70 Buffer: 10 Brocade DCX-4S Low: 0 High: 75 Buffer: 10 Default alarm settings Threshold state Below: 3 Above: 3 Informative Out-of-range Resource class settings The Resource class monitors flash memory. It calculates the amount of flash space consumed and compares it to a defined threshold. Resource class area Table 25 describes the Fabric Watch Resource class area. Configure the Resource class using the sysMonitor command. TABLE 25 Resource class area Area Description Flash Monitors the compact flash space available by calculating the percentage of flash space consumed and comparing it with the configured high threshold value. Resource class setting guidelines Use the Resource Class default settings listed in Table 26. Resource class default settings Table 26 provides default settings for areas in the Resource class. TABLE 26 Resource class default settings Flash Monitors the percentage of compact flash used Unit: Percentage (%) Time base: none Low: 0 High: 90 Buffer: 0 Below: 3 Above: 3 Informative Informative Out_of_range In_range Fabric Watch Administrator's Guide 77 53-1002752-01