Dell C3760n Dell /C3760dn Color Laser Printer Users Guide - Page 169
Copy Printer Settings, IP Address
View all Dell C3760n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
802.1x Purpose: To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer. Values: Configure 802.1x Enable IEEE 802.1x Select the check box to enable IEEE 802.1x authentication. Authentication Method EAP-MD5 EAP-MS CHAPv2 Selects the authentication method to use for IEEE 802.1x authentication. PEAP/MS CHAPv2 EAP-TLS*1, 2 Login Name: (Device Sets the login name (device name) for IEEE 802.1x authentication using Name) up to 128 alphanumeric characters. Password Sets the login password for IEEE 802.1x authentication using up to 128 alphanumeric characters. Re-enter Password Confirms the set login password. Certificate Validation Select the check box to enable Certificate Validation. *1 This item is displayed only when the optional hard disk is installed and is set to On for encryption. *2 When this item is selected, Password and Re-enter Password need not to be specified. IP Filter (IPv4) Purpose: To specify the IP address and subnet mask to be permitted or denied access to the printer. Values: Access List Address Address Mask Active Mode Sets the IP addresses that are permitted or denied access to the printer. Enter a numeric value between 0 and 255 in each field. Sets the subnet mask that are permitted or denied access to the printer. Enter a numeric value between 0 and 255 in each field. Reject Rejects printing from specified network address. Accept Permits printing from specified network address. Off Disables the IP Filter feature for the specified IP address. Copy Printer Settings The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report pages. Copy Printer Settings Purpose: To copy the printer settings to one or more of the same model of the printer. To copy the settings to another printer, specify the IP address and password of the printer to which the settings are copied in the IP Address text box and Password text box. Then, click the Copy the settings to the Host in the above list button. Copying the settings is complete. The connection time-out period is 60 seconds. After that, you can check whether the settings were copied to this page. And you need to check the Copy the settings to the Host in the above list and reboot the printer menu of the Dell Printer Configuration Web Tool in the destination printer to verify if the settings were actually copied or not. Dell™ Printer Configuration Web Tool 167