Dell Chromebook 7310 Chromebook 13 - 7310 Disassembly and Reassembly Guide - F - Page 14

Battery

Page 14 highlights

Bottom Cover Validation Steps 1. Physically look at the edges of the system. Make sure it is aligned properly and no gap should be seen on all edges. Battery Battery Disassembly Video The following video contains the brief disassembly procedure, for use by the learner as an additional visual reference. (To download, please right­click on the link above and select "Save Target As" or "Save Link As") 1. Pre­Removal Instructions Battery Disassembly Steps Before removing the Battery: 1. During installation or removal of any hardware always ensure all data is backed up properly. 2. Disconnect any telephone, network, or USB cables from the computer. 3. Disconnect the computer and all attached devices from their electrical outlets. 4. Remove the Bottom Cover. Offline video.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

Bottom Cover Validation Steps
1.
Physically look at the edges of the system. Make sure it is aligned properly and no gap should be seen on all edges.
Battery
Battery Disassembly Video
The following video contains the brief disassembly procedure, for use by the learner as an additional visual reference.
Offline video.
(To download, please right±click on the link above and select "Save Target As" or "Save Link As")
Battery Disassembly Steps
1.
Pre±Removal Instructions
Before removing the Battery:
1. During installation or removal of any hardware always ensure all data is backed up properly.
2. Disconnect any telephone, network, or USB cables from the computer.
3. Disconnect the computer and all attached devices from their electrical outlets.
4. Remove the
Bottom Cover
.