Dell Chromebook 7310 Chromebook 13 - 7310 Disassembly and Reassembly Guide - F - Page 84

LCD Cover

Get Dell Chromebook 7310 PDF manuals and user guides View all Dell Chromebook 7310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

eDP Cable Reassembly Steps 1. Connect the camera cable to the camera. 2. Re­route the eDP cable to its routing channel. 3. Re­apply the cloth and silver tapes. 4. Reinstall the pre­removal part(s) in descending order. eDP Cable Validation Steps 1. Power on the system and ensure the system boots up properly. LCD Cover LCD Cover Disassembly Steps 1. Pre­Removal Instructions Before removing the LCD Cover: 1. During installation or removal of any hardware always ensure all data is backed up properly. 2. Disconnect any telephone, network, or USB cables from the computer. 3. Disconnect the computer and all attached devices from their electrical outlets. 4. Remove the Bottom Cover, Battery, M.2 SSD, WLAN Card, CPU Fan, Heat Sink, System Board, LCD Assembly , Hinge Cover, LCD Bezel, Camera, LCD Hinges, LCD Panel, eDP Cable. 2. After you've completed the pre­removal parts, what's left would be the LCD cover as shown below. The LCD cover assembly includes the antenna cables.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
eDP Cable Reassembly Steps
1.
Connect the camera cable to the camera.
2.
Re±route the eDP cable to its routing channel.
3.
Re±apply the cloth and silver tapes.
4.
Reinstall the pre±removal part(s) in descending order.
eDP Cable Validation Steps
1.
Power on the system and ensure the system boots up properly.
LCD Cover
LCD Cover Disassembly Steps
1.
Pre±Removal Instructions
Before removing the LCD Cover:
1. During installation or removal of any hardware always ensure all data is backed up properly.
2. Disconnect any telephone, network, or USB cables from the computer.
3. Disconnect the computer and all attached devices from their electrical outlets.
4. Remove the
Bottom Cover
,
Battery
,
M.2 SSD
,
WLAN Card
,
CPU Fan
,
Heat Sink
,
System Board
,
LCD Assembly
,
Hinge Cover
,
LCD Bezel
,
Camera
,
LCD Hinges
,
LCD Panel
,
eDP Cable
.
2.
After you've completed the pre±removal parts, what's left would be the LCD cover as shown below.
The LCD cover assembly includes the antenna cables.