Dell Chromebook 7310 Chromebook 13 - 7310 Disassembly and Reassembly Guide - F - Page 50

Keyboard

Get Dell Chromebook 7310 PDF manuals and user guides View all Dell Chromebook 7310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

System Board Reassembly Steps 1. Place the system board into its compartment on the chassis, making sure all the cables are not under the system board. 2. Tighten the two screws to secure the system board in place. 3. Connect the keyboard cable to its connectors on the system board, and press down gently on the cable to secure it. 4. Connect the eDP cable, DC­in cable, speaker cable, LED board cable, keyboard backlight cable, touchpad cable, I/O board cable and fan cable to their connectors on the system board. 5. Reinstall the pre­removal part(s) in descending order. System Board Validation Steps 1. Power on the system to ensure system completes the POST and booting up cycle. Keyboard Keyboard Disassembly Video The following video contains the brief disassembly procedure, for use by the learner as an additional visual reference.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
System Board Reassembly Steps
1.
Place the system board into its compartment on the chassis, making sure all the cables are not under the system board.
2.
Tighten the two screws to secure the system board in place.
3.
Connect the keyboard cable to its connectors on the system board, and press down gently on the cable to secure it.
4.
Connect the eDP cable, DC±in cable, speaker cable, LED board cable, keyboard backlight cable, touchpad cable, I/O board cable and fan cable to their connectors on
the system board.
5.
Reinstall the pre±removal part(s) in descending order.
System Board Validation Steps
1.
Power on the system to ensure system completes the POST and booting up cycle.
Keyboard
Keyboard Disassembly Video
The following video contains the brief disassembly procedure, for use by the learner as an additional visual reference.