Dell DAE Setup Guide - Page 4
Parts Checklist for Basic Configuration, If you will use EMC Control Center - dae2 to dae2 cable
View all Dell DAE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Parts Checklist for Basic Configuration Before you start, be sure you have the necessary materials available. Most required parts were provided with your system, but some are shipped with particular components (and configurations) and others are shipped separately. ❑ One or more DAE2 disk enclosures ❑ EMC-approved disk drives For a list of supported RAID disks, refer to the EMC Storage Systems CX-Series Disk and Software Matrix (P/N 014003111), available on the Powerlink website. ❑ If your DAE2 is not already installed in a rackmount cabinet ❑ One or more rails kits, and the ❑ EMC Storage Systems 40U Cabinet Configuration Guide (P/N 014003082) ❑ Fibre Channel copper cable for connecting the DAE2 to a storage processor device (1 per connection) ❑ Copper cables for connecting multiple DAE2s to each other (2 per DAE2) ❑ EMC 2-Gigabit Disk Enclosure (DAE2) Hardware Reference (P/N 014003048) ❑ If you will use EMC Control Center™ Navisphere® to manage the DAE2 with an EMC CX-Series storage system ❑ EMC Fibre Channel Storage System CX-Series Configuration and Planning Guide (P/N 014003113) ❑ EMC ControlCenter Navisphere Manager Revision 6.X Administrator's Guide (P/N 069001161) 2