Dell Dimension 2350 Dell Dimension 2350 Owner's Manual - Page 84
Start, My Computer, Properties
View all Dell Dimension 2350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
www.dell.com | support.dell.com 8 To insert a module, press out the securing clip at each end of the memory module connector. memory module connectors securing clips (2) notch memory module crossbar connector cutouts (2) step 8 step 9 step 10 9 Align the notch on the bottom of the module with the crossbar in the connector. NOTICE: To avoid breaking the memory module, do not press near the middle of the module. 10 Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place. If you insert the module correctly, the securing clips snap into the cutouts at each end of the module. 11 Replace the computer cover (see page 90). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 12 Connect your computer and devices to electrical outlets, and turn them on. 13 Click the Start button, right-click My Computer, and then click Properties. 84 A d d i n g Pa r ts