Dell Dimension 5000 Owner's Manual - Page 85
Floppy Drive, Removing a Floppy Drive
View all Dell Dimension 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
5 Gently slide the new drive (second hard drive) into place until you hear a click or feel the drive securely installed. secondary hard drive in lower bay rail tabs (2) primary hard drive in upper bay hard drive bay 6 Connect a power cable to the drive. 7 Connect the data cable to the drive and to the system board (see page 61). Floppy Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. Follow the procedures in "Before You Begin" on page 53. NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page 87. Removing a Floppy Drive 1 Follow the procedures in "Before You Begin" on page 53." 2 Remove the drive panel (see page 76). Removing and Installing Parts 85