Dell Dimension 5150 Service Manual - Page 21
Cards - ram
View all Dell Dimension 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
1 notch 2 memory module 3 cutouts (2) 4 crossbar NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the module. 5. Insert the module into the connector until the module snaps into position. If you insert the module correctly, the securing clips snap into the cutouts at each end of the module. 6. Replace the computer cover. NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. 7. Connect your computer and devices to electrical outlets, and turn them on. 8. When a message appears stating that memory size has changed, press to continue. 9. Log on to your computer. 10. Right-click the My Computer icon on your Microsoft® Windows® desktop and click Properties. 11. Click the General tab. 12. To verify that the memory is installed correctly, check the amount of memory (RAM) listed. Cards CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.