Dell E1609WFP User's Guide - Page 13

Back to Contents Page Operating the Monitor Dell™ E1609W Flat Panel Monitor User's Guide Using the Front Panel Using the OSD Menu Setting the Optimal Resolution Using the Tilt Using the Front Panel Buttons Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows their numeric values as they change. The following table describes the front panel buttons: A Use the Menu button to open the on-screen display (OSD), select function icons, exit from menus and sub-menus, and to exit the OSD. See Accessing the Menu System. MENU B Use this button for direct access to the 'Brightness' and 'Contrast' control menu. Brightness/Contrast Hot Key C Use this button to activate automatic setup and adjustment. The following dialog will appear on screen as the monitor self-adjusts to the current input: Auto Adjust Auto Adjustment button allows the monitor to self-adjust to the incoming video signal. After using 'Auto Adjustment', you can further tune your monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD. NOTE: Auto Adjust will not occur if you press the button while there are no active video input signals, or attached cables. D Use this button to turn your monitor on or off. A green power light indicates that the monitor is on and functional.An amber power light indicates that the monitor is in power save mode. Power Button & Indicator On Screen Menu/Display (OSD)