Dell E1609WFP User's Guide - Page 14

Direct-Access Functions Function Adjustment Method Auto adjustment Use this button to activate automatic setup and adjustment. The following dialog will appear on screen as the monitor self-adjusts to the current input: Brightness / Contrast Auto Adjustment button allows the monitor to self-adjust to the incoming video signal. After using 'Auto Adjustment', you can further tune your monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD. NOTE: Auto Adjust will not occur if you press the button while there are no active video input signals, or attached cables. With the menu off, press button to display the 'Brightness' and 'Contrast' adjustment menu. The 'Brightness' function adjusts the luminance of the flat panel. Adjust 'Brightness' first, then adjust 'Contrast' only if further adjustment is necessary. "+" increases 'brightness' " - " decreases 'brightness' Allows you to adjust brighness or luminance of the backlight. "+" increases the 'contrast' "-" decreases the 'contrast' Using the OSD Menu Accessing the Menu System 1. With the menu off, press the MENU button to open the OSD system and display the main features menu.