Dell Force10 Software Defined Networking Software-Defined Networking (SDN) Dep - Page 30
flow-map, Z-Series, S4810, interface-type
View all Dell Force10 Software Defined Networking manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
flow-map Specify if flows installed by the controller should be interpreted by the switch for placement in L2 or L3 tables. Z-Series, S4810 Syntax Parameter flow-map {l2|l3} enable l2 Enter l2 to interpret Layer 2 flows. l3 Enter l3 to interpret Layer 3 flows. Defaults Command Modes Command History None (not enabled) OPENFLOW INSTANCE Version 9.1(0.0) Introduced on Z9000 and S4810. Usage Information Related Commands L2 flow-mapping is not supported on OpenFlow instances with an interface-type of "port." openflow of-instance Create or modify an OpenFlow instance. interface-type Specify the type of interface (port, VLAN, or any) for the OpenFlow instance. Z-Series, S4810 Syntax Defaults Parameter interface-type {any|port|vlan} port any Enter the keyword any to enable configuration of physical interfaces, LAGs, and VLANs on the selected OF instance. port Default. Enter the keyword port to enable configuration of LAGs or physical interfaces on the selected OF instance. vlan Enter the keyword vlan to enable configuration of VLANs on the selected OF instance. NOTE: You must associate the OF instance with the VLAN when the VLAN is created. Command Modes Command History OPENFLOW INSTANCE Version 9.1(0.0) Introduced on Z9000 and S4810. 30