Dell Inspiron 11 3000 2-in1 Series Special Edition inspiron 11 3152 Service Ma - Page 81
Replacing the Windows-button board, Procedure, Post-requisites
View all Dell Inspiron 11 3000 2-in1 Series Special Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Replacing the Windowsbutton board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the screw hole on the Windows-button board with the screw hole on the display bezel. 2 Replace the screw that secures the Windows-button board to the display bezel. 3 Slide the Windows-button board cable and the touch-board cable into the connectors on Windows-button board and press down the latches to secure the cables. 4 Adhere the adhesive tape to the connector on the Windows-button board to secure the cable. 5 Turn the display-panel assembly over. Post-requisites 1 Replace the display back-cover and antenna assembly . 2 Replace the display assembly. 3 Replace the battery. 4 Replace the base cover. 81