Dell Inspiron 11 3000 2-in1 Series Special Edition inspiron 11 3152 Service Ma - Page 85

Replacing the display cable, Procedure, Post-requisites

Page 85 highlights

Replacing the display cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Route the display cable through the routing guides on the display bezel and adhere the display cable on the display bezel. 2 Slide the display cable into the connector on the touch board and press down the latch to secure the cable. 3 Slide the Windows-button board cable into the connector on the Windows-button board and press down the latch to secure the cable. 4 Adhere the adhesive tape on the Windows-button board connector. Post-requisites 1 Replace the camera. 2 Replace the display back-cover and antenna assembly. 3 Replace the display assembly. 4 Replace the battery. 5 Replace the base cover. 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91

Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Route the display cable through the routing guides on the display bezel
and adhere the display cable on the display bezel.
2
Slide the display cable into the connector on the touch board and press
down the latch to secure the cable.
3
Slide the Windows-button board cable into the connector on the
Windows-button board and press down the latch to secure the cable.
4
Adhere the adhesive tape on the Windows-button board connector.
Post-requisites
1
Replace the
camera
.
2
Replace the
display back-cover and antenna assembly
.
3
Replace the
display assembly
.
4
Replace the
battery
.
5
Replace the
base cover
.
85