Dell Inspiron 11 3162 Inspiron 11 3000 Service Manual - Page 28
Replacing the I/O board, Procedure, Post-requisites
View all Dell Inspiron 11 3162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Replacing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable. 2 Slide the ports on the I/O board into the slots on the base cover and snap the I/O board into place. 3 Align the screw hole on the I/O board with the screw hole on the base cover and replace the screw. 4 Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable. Post-requisites 1 Replace the battery. 2 Follow the procedure from step 2 to step 5 in "Replacing the base cover". 28