Dell Inspiron 11 3162 Inspiron 11 3000 Service Manual - Page 59
Replacing the display assembly, Procedure, Post-requisites
![]() |
View all Dell Inspiron 11 3162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure CAUTION: Place the computer on a soft and clean surface to avoid scratching the display back-cover and antenna assembly. 1 Place the display assembly on a flat and clean surface. 2 Align the screw holes on the display hinges with the screw holes on the palm rest and keyboard assembly. 3 Replace the screws that secure the display assembly to the palm rest and keyboard assembly. 4 Slide the display cable into the connector on the system board and close the latch to secure the cable. 5 Slide the display-cable bracket into the slot on the palm rest and keyboard assembly. 6 Align the screw hole on the display-cable bracket with the screw hole on the system board. 7 Replace the screw that secures the display-cable bracket to the system board. Post-requisites 1 Replace the wireless card. 2 Follow the step 4 procedure in "Replacing the I/O board". 3 Replace the battery. 4 Follow the procedure from step 2 to step 5 in "Replacing the base cover". 59
![](/manual_guide/products/dell-inspiron-11-3162-inspiron-11-3000-service-manual-83279f2/59.png)