Dell Inspiron 1120 Contents: Mini PCI Type 3B Data Fax Modem by 3Com User's Gu - Page 11

Do DS0 on Reset, MNP/V.42 disabled V.32, V.34

Page 11 highlights

hangup; if S1=255, the modem will not hang up when the carrier is lost; dropping DTR hangs up the modem (1/10 second) S11 Duration of the touchtone dialing tone 50-255 spacing S12 Guard time for the escape code (1/50 0-255 second) S13 Bitmapped register. Selects the bit(s) 0-255 you want on and sets S13 to the total of the values in the Value column. For example, ATS13.0=17 enables bit 0 (value 1) and bit 4 (value 16) 1 = Reset on DTR loss 2 = Reduced non-ARQ transmit buffer 4 = Set DEL=backspace 8 = Do DS0 on DTR 16 = Do DS0 on Reset 128 = Escape code hangup S15 Bitmapped register. 1 = MNP/V.42 disabled in V.22 0-255 2 = MNP/V.42 disabled in V.22bis 4 = MNP/V.42 disabled V.32, V.34 8 = Disable MNP handshake 16 = Disable MNP level 4 32 = Disable MNP level 3 64 = Unusual MNP incompatibility 128 = Disable V.42 136 = Disable V.42 detection phase S16 Bitmapped test register. 2 = Dial test 2 S18 Test timer for AT command &T; when 0-255 AT&T=0 the timer is disabled. S19 Duration for inactivity timer; S19=0 0-255 disables the timer S21 Sets error correction break length (1/100 0-255 second) S22 Designates the ASCII character code 0-127 for XON S23 Designates the ASCII character code 0-127 for XOFF 70 ms 50 0 0 0 0 sec 0 10 ASCII 17 ASCII 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

hangup; if S1=255, the modem will not
hang up when the carrier is lost;
dropping DTR hangs up the modem
(1/10 second)
S11
Duration of the touchtone dialing tone
spacing
50-255
70 ms
S12
Guard time for the escape code (1/50
second)
0-255
50
S13
Bitmapped register. Selects the bit(s)
you want on and sets S13 to the total of
the values in the Value column. For
example, ATS13.0=17 enables bit 0
(value 1) and bit 4 (value 16)
0-255
0
1 = Reset on DTR loss
2 = Reduced non-ARQ transmit buffer
4 = Set DEL=backspace
8 = Do DS0 on DTR
16 = Do DS0 on Reset
128 = Escape code hangup
S15
Bitmapped register.
0-255
0
1 = MNP/V.42 disabled in V.22
2 = MNP/V.42 disabled in V.22bis
4 = MNP/V.42 disabled V.32, V.34
8 = Disable MNP handshake
16 = Disable MNP level 4
32 = Disable MNP level 3
64 = Unusual MNP incompatibility
128 = Disable V.42
136 = Disable V.42 detection phase
S16
Bitmapped test register. 2 = Dial test
2
0
S18
Test timer for AT command &T; when
AT&T=0 the timer is disabled.
0-255
0 sec
S19
Duration for inactivity timer; S19=0
disables the timer
0-255
0
S21
Sets error correction break length (1/100
second)
0-255
10
S22
Designates the ASCII character code
for XON
0-127
ASCII 17
S23
Designates the ASCII character code
for XOFF
0-127
ASCII 19