Dell Inspiron 13 7375 2-in-1 Inspiron 13 7000 2-in-1 Service Manual - Page 51
Removing the power and volume-buttons board, Prerequisites, Procedure
View all Dell Inspiron 13 7375 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Removing the power and volumebuttons board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the coin-cell battery. Procedure 1 Peel off the tape that secures the power and volume-buttons board-cable to the palm-rest assembly. 2 Disconnect the power and volume-buttons board-cable from the I/O board. 3 Remove the power and volume-buttons board-cable from the routing guides on the palm-rest assembly. 4 Remove the screw (M2x3) that secures the power and volume-buttons board to the palm-rest assembly. 51