Dell Inspiron 13 7375 2-in-1 Inspiron 13 7000 2-in-1 Service Manual - Page 68
Replacing the display assembly, Procedure, Post-requisites
![]() |
View all Dell Inspiron 13 7375 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure CAUTION: Place the computer on a soft and clean surface to avoid scratching the display. 1 Place the display assembly face down on the palm-rest assembly. 2 Align the screw holes on the display hinges with the screw holes on the palmrest assembly. 3 Replace the four screws (M2.5x2.5 Big Head) that secure the display assembly to the palm-rest assembly. 4 Close the display and turn the computer over. 5 Slide the display cable and the touch-screen board-cable into their respective connectors on the system board and close the latches to secure the cables. 6 Adhere the pieces of tape that secure the display cable and the touch-screen board-cable to their respective connectors on the system board. Post-requisites 1 Replace the wireless card. 2 Replace the battery. 3 Replace the base cover. 68
![](/manual_guide/products/dell-inspiron-13-7375-2in1-inspiron-13-7000-2in1-service-manual-da7900f/68.png)