Dell Inspiron 13 7375 2-in-1 Inspiron 13 7000 2-in-1 Service Manual - Page 56
Replacing the status-light board, Procedure, Post-requisites
View all Dell Inspiron 13 7375 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Replacing the status-light board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Align and place the status-light board in the slot on the palm-rest assembly. 2 Adhere the foam securing the status-light board to the palm-rest assembly. 3 Slide the status-light board-cable into the connector on thesystem board and close the latch to secure the cable. Post-requisites 1 Replace the battery. 2 Replace the base cover. 56