Dell Inspiron 14z 1470 Inspiron 14z 1470 Owners Manual - Page 43
Replace the palm-rest assembly. See Replacing the Palm-Rest Assembly, support.dell.com/manuals
View all Dell Inspiron 14z 1470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
CAUTION: Use firm and even pressure to slide the mini-card into place. If you use excessive force, you may damage the connector. CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the mini-card and on the system board, and realign the mini-card. CAUTION: To avoid damage to the mini-card, never place cables under the minicard. 3 Insert the mini-card connector at a 45-degree angle into the connector on the system board. 4 Press the other end of the mini-card down and replace the screw that secures the mini-card to the system board. 5 Connect the antenna cables to the mini-card as follows: • Connect the white cable to the connector with the white triangle. • Connect the black cable to the connector with the black triangle. 6 Secure any unused antenna cables in the protective mylar sleeve. 7 Slide the USB-board cable into the connectors on the USB board and the system board, and press down the securing latches. See "Replacing the USB Board" on page 63. 8 Replace the palm-rest assembly. See "Replacing the Palm-Rest Assembly" on page 38. 9 Replace the keyboard. See "Replacing the Keyboard" on page 33. 10 Follow the instructions from step 5 to step 6 in "Replacing the Optical Drive" on page 25. 11 Replace the module cover. See "Replacing the Module Cover" on page 16. 12 Replace the battery. See "Replacing the Battery" on page 14. 13 Install the drivers and utilities for your mini-card as required. For more information, see Me and My Dell on support.dell.com/manuals. Wireless Mini-Card 43