Dell Inspiron 15 7579 2-in-1 Inspiron 15 70002-in-1 Service Manual - Page 102
Removing the sensor board, Prerequisites, Procedure
View all Dell Inspiron 15 7579 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Removing the sensor board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the display assembly. 4 Follow the procedure from step 1 to step 2 in "Removing the display panel". Procedure CAUTION: Place the display-panel assembly on a soft and clean surface to avoid scratching the display. 1 Place the display-panel assembly face down on a flat surface. 2 Remove the screw that secures the sensor board to the display-panel assembly. 3 Peel off the tape that secures the sensor-board cable to the sensor board. 4 Open the latch to disconnect the sensor-board cable from the sensor board. 102