Dell Inspiron 15 7579 2-in-1 Inspiron 15 70002-in-1 Service Manual - Page 80
Replacing the display assembly, Procedure, Post-requisites
View all Dell Inspiron 15 7579 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure CAUTION: Place the computer on a soft and clean surface to avoid scratching the display. 1 With the display facing down, align the screw holes on the display hinges with the screw holes on the palm-rest assembly. 2 Replace the screws that secure the display assembly to the palm-rest assembly. 3 Turn the computer over and close the display. Post-requisites 1 Replace the system board. 2 Replace the heat sink. 3 Replace the solid-state drive. 4 Replace the memory module. 5 Replace the wireless card. 6 Replace the battery. 7 Replace the base cover. 80