Dell Inspiron 15 7579 2-in-1 Inspiron 15 70002-in-1 Service Manual - Page 44
Replacing the status-light board, Procedure, Post-requisites
![]() |
View all Dell Inspiron 15 7579 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Replacing the status-light board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Place the status-light board into the slot on the palm-rest assembly. 2 Adhere the foam that secures the status-light board to the palm-rest assembly. 3 Slide the status-light board cable into the connector on the keyboard daughter-board and close the latch to secure the cable. 4 Adhere the foam that secures the status-light board to the palm-rest assembly. 5 Adhere the status-light board cable to the palm-rest assembly. 6 Route the speaker cable through the routing guides on the palm-rest assembly and adhere the tape that secures the speaker cable to the palm-rest assembly. Post-requisites 1 Replace the battery. 2 Replace the base cover. 44
![](/manual_guide/products/dell-inspiron-15-7579-2in1-inspiron-15-70002in1-service-manual-4ac6944/44.png)