Dell Inspiron 17 5755 Service Manual - Page 69
Replacing the battery-connector board, Procedure, Post-requisites
View all Dell Inspiron 17 5755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Replacing the batteryconnector board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the battery-connector board with the screw holes on the palm-rest assembly. 2 Replace the screws that secure the battery-connector board to the palmrest assembly. 3 Route the antenna cable through the routing guides on the batteryconnector board. 4 Adhere the tapes that secure the antenna cable to the palm-rest assembly. Post-requisites 1 Replace the system board. 2 Replace the heat-sink assembly. 3 Replace the I/O board. 4 Follow the procedure from step 3 to step 8 in "Replacing the computer base". 5 Follow the procedure from step 4 to step 7 in "Replacing the optical drive". 6 Replace the keyboard. 7 Replace the memory modules. 8 Replace the wireless card. 9 Follow the procedure from step 4 to step 6 in "Replacing the hard drive". 10 Replace the base cover. 11 Replace the battery. 69