Dell Inspiron 17 5755 Service Manual - Page 76
Replacing the display assembly, Procedure, Post-requisites
View all Dell Inspiron 17 5755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Place the palm-rest assembly at the edge of a table with the display hinges facing up. 2 Align the screw holes on the display hinges with the screw holes on the palm-rest assembly. 3 Replace the screws that secure the display hinges to the palm-rest assembly. 4 Close the display and turn the computer over. 5 Route the antenna cable through the routing guides on the palm-rest assembly. 6 Adhere the tapes that secure the display cable and the antenna cables to the palm-rest assembly. Post-requisites 1 Replace the power-adapter port. 2 Replace the system board. 3 Replace the heat-sink assembly. 4 Replace the I/O board. 5 Follow the procedure from step 3 to step 8 in "Replacing the computer base". 6 Follow the procedure from step 4 to step 7 in "Replacing the optical drive". 7 Replace the keyboard. 8 Replace the memory modules. 9 Replace the wireless card. 10 Follow the procedure from step 4 to step 6 in "Replacing the hard drive". 76