Dell Inspiron 23 2350 Service Manual - Page 43
Removing the USB Board, Prerequisites, Procedure
View all Dell Inspiron 23 2350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Removing the USB Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the computer base. 3 Follow the procedure from step 1 to step 4 in "Removing the Hard Drive". Procedure 1 Peel off the tape from the USB-board cable. 2 Open the clip of the USB-board cable routing. 3 Using the pull tab, disconnect the USB-board cable from the USB board and remove it from the cable-routing clip. 4 Remove the screw that secures the USB board to the computer base. 43