Dell Inspiron 23 2350 Service Manual - Page 58
Replacing the Processor, Procedure
View all Dell Inspiron 23 2350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Replacing the Processor WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: If either the processor or the heat sink is replaced, use the thermal grease provided in the kit to make sure that thermal conductivity is achieved. Procedure NOTE: A new processor ships with a thermal pad in the package. In some cases, the processor may ship with the thermal pad attached to it. 1 Align the pin-1 corner on the processor with the pin-1 corner on the processor socket, and then place the processor in the processor socket. NOTE: The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner on the processor socket. When the processor is properly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the others, the processor is not seated properly. 58